Last updated: 2026-11-04
Wallpaper removal runs about $0.75 to $4 per square foot of wall for ordinary paper and $3 to $8 for painted-over or stubborn paper. A typical 12 x 15 room comes to $446 to $1,263 before repairs. Enter your room below, or change the typical defaults, to price your own job.
Each deducts 21 sq ft
Each deducts 15 sq ft
Multiplies the wall area and any per-room repair.
Estimated Wallpaper Removal Cost
$446 – $1,263
396 sq ft of wall, standard paper (steam or score and soak)
Cost Breakdown
Starting values are typical defaults for a 12 x 15 room. Lead abatement, framing repair, furniture moving, and sales tax are not included.
Free to use. No signup needed.
How Much Does Wallpaper Removal Cost in 2026?
The published numbers disagree, so check what each one counts. Fixr lists stripping at $0.75 to $1.50 per sq ft and Inch Calculator at $0.75 to $1.75, and Inch Calculator gives $1 to $5 for general removal. CostHelper puts a 12 x 15 room at about $250 to $450 if all goes well, and $500 to $1,000 or more with complications. Homewyse's May 2026 figure is $2.99 to $6.09 per sq ft, and it bundles scoring, solvent, masking, surface repair materials, primers, steamer rental, setup, and cleanup. Before you compare your bid or a quote to a published number, look at what that number includes.
This calculator keeps those pieces apart. It starts with removal by paper type, then adds stubborn layers, tall-wall access, setup, repair, and paint as their own lines, so you can see where the money goes and take out what is not in your scope.
There is no waste factor here. Removal is labor with a few supplies, so every rate is charged on the wall area you actually strip. In my 20+ years of remodeling, the number that moves a job is what shows up once the finish comes off a wall, especially in older homes. That is why repair is its own line and not buried in the removal rate.
Inputs You'll Need
- Wall area: room length, width, wall height, doors, and windows, or the papered area if it is one wall.
- Paper type: pick a corner with a putty knife. If a dry sheet pulls off whole, it is strippable. If it is painted over, plan on soak and scrape.
- Layers: look at a seam or a torn edge and count. Painted-over paper already sits on the soak and scrape rate, so the layer add-on does not stack on it.
- Access: taller walls and steep stairwells add 15-25%, per CostHelper.
- Wall condition: whether the wall needs patching, a skim coat, or drywall repair once the paper is off.
- Year built: before 1978 means a lead question to answer first.
Wallpaper Removal Cost by Paper Type
| Paper Type | Per Sq Ft of Wall | 12 x 15 Room (396 sq ft) |
|---|---|---|
| Strippable or peel-and-stick | $0.75-$1.75 | $347-$768 |
| Standard paper | $1.00-$3.00 | $446-$1,263 |
| Vinyl or non-porous | $1.50-$4.00 | $644-$1,659 |
| Painted-over or stubborn paper | $3.00-$8.00 | $1,238-$3,243 |
National ranges before your ZIP adjustment, one layer, including $50-$75 setup and equipment. Repair, paint, and sales tax are not included. Prices vary by region, so check them against local quotes or your own labor rate.
Wallpaper Removal Cost by Room Size
| Room (8 ft walls) | Wall Area | Standard Paper |
|---|---|---|
| 10 x 10 | 284 sq ft | $334-$927 |
| 12 x 15 | 396 sq ft | $446-$1,263 |
| 14 x 16 | 444 sq ft | $494-$1,407 |
| 16 x 20 | 540 sq ft | $590-$1,695 |
Each room deducts one door (21 sq ft) and one window (15 sq ft). One layer, including setup. Sources are listed at the bottom of the page.
What Gets Added After the Paper Comes Off?
| Line Item | Typical Range |
|---|---|
| Multiple or stubborn layers (not on soak and scrape) | $0.60-$1.50/sq ft |
| Taller walls or steep stairwell | +15-25% on removal |
| Setup and equipment | $50-$75 (applied once per job here) |
| Minor patching | $100-$500 (applied per room here) |
| Skim coat | $0.75-$4.00/sq ft |
| Heavy drywall repair | $400-$1,200 per room |
| Drywall removal and replacement (not in calculator) | $4-$5/sq ft |
| Prime and paint | $1.50-$3.00/sq ft |
| Lead test | $200-$600 per sample |
Worked Examples
1. Bedroom, standard paper
12 x 15 room, 8 ft walls, one door, one window. Wall area: 2 x (12 + 15) x 8 = 432, minus 21 and 15 = 396 sq ft. Removal: 396 x $1 = $396, up to 396 x $3 = $1,188. Add setup of $50-$75. Total: $446-$1,263, or $1.13-$3.19 per sq ft all-in.
2. One accent wall, strippable paper
12 ft wide, 8 ft tall: 96 sq ft. Removal: 96 x $0.75 = $72, up to 96 x $1.75 = $168. Add setup of $50-$75. Total: $122-$243. On a wall this small the setup charge is a big share of the price, so roll it in with other work if you can.
3. Pre-1978 dining room, painted over
14 x 16 room, 9 ft walls, one door, two windows. Wall area: 2 x 30 x 9 = 540, minus 21 and 30 = 489 sq ft. Soak and scrape: 489 x $3 = $1,467, up to 489 x $8 = $3,912. Setup $50-$75. Skim coat: $366.75-$1,956. Prime and paint: $733.50-$1,467. One lead test sample: $200-$600. Total: $2,817-$8,010. A slightly larger room than example 1, at several times the money, because of what is on the wall and the work after it.
Before Your Number Goes Out
- Test a patch before you price. Pull a corner and soak a small area. It tells you the paper type, the layer count, and what the wall looks like underneath, all before your number goes out.
- Price repair as an allowance. You cannot see the wall until the paper is off. Write removal as a firm price and repair as an allowance with a stated rate, so a damaged wall becomes a change order and not your loss.
- Check your number against hours. UseCalcPro's 4-12 hours per room is 33 to 99 sq ft per hour on a 396 sq ft room. If your bid only works at the fast end, it is too thin for painted-over paper.
- Write the exclusions down. Homewyse's estimate leaves out hazardous material testing and remediation, framing and molding repairs, general contractor overhead (13-22% if a GC supervises), sales tax, and permits. State what yours leaves out too.
Common Mistakes to Avoid
- Using floor area. A 12 x 15 room is 180 sq ft of floor but 396 sq ft of wall after openings. Price the floor number and you are low by more than half.
- Assuming one layer. Multiple layers often need both steaming and soaking, per Fixr. Check a seam before you bid.
- Leaving repair off the bid. Minor patching alone can run $100-$500, and that can be the whole margin on a small job.
- Skipping the year-built question. On a pre-1978 home, ask it first. EPA requires certified firms for paid work that disturbs lead paint beyond the minor repair exemption.
Related Calculators
- Wallpaper Calculator - Rolls Needed for the New Paper
- Interior Painting Cost Calculator - Price the Walls After Removal
- Paint Calculator - Gallons and Primer for the Same Room
- Popcorn Ceiling Removal Cost Calculator - Doing the Ceiling Too?
Bidding removal with paint on top? Try EstimationPro on one real job ($9, 30-day money-back guarantee): build the line-item estimate, send it from EstimationPro, and it follows up with your client automatically: at 24 hours if they haven't opened it, 48 hours after they open it with no reply, and a final reminder at 7 days.
How to Use This Calculator
Measure the wall area
Enter the room length, width, and wall height, plus doors and windows, or type the papered wall area directly. Removal is priced on wall area, not floor area.
Pick the paper type and layers
Strippable paper comes off cheapest. Standard paper needs steam or scoring and soaking. Vinyl costs more, and painted-over or stubborn paper means soak and scrape. Multiple or stubborn layers add a charge.
Set the access and repair
Mark taller walls or a steep stairwell, then choose what the wall needs after the paper is off: nothing, minor patching, a full skim coat, or heavy drywall repair.
Add paint, a lead test, and your ZIP
Add priming and painting if it is part of the job and a lead test if the home was built before 1978. Enter your ZIP to adjust the whole number for your area.
Wallpaper Removal Cost Formula
Wall area = 2 x (Length + Width) x Height - Doors x 21 - Windows x 15
Removal = Wall area x (Paper rate + $0.60-$1.50 if multiple or stubborn layers) x Access
Total = (Removal + $50-$75 setup + Repair + Paint + Lead test) x Local rate Where:
- Paper rate
- = $0.75-$1.75 strippable, $1-$3 standard, $1.50-$4 vinyl, $3-$8 painted-over or stubborn paper, per sq ft of wall
- Layers
- = $0.60-$1.50 per sq ft add-on for multiple or stubborn layers; not added to the $3-$8 soak and scrape rate
- Access
- = 1.00 standard walls; 1.15-1.25 taller walls or a steep stairwell
- Repair
- = $100-$500 patching (applied per room), $0.75-$4/sq ft skim coat, or $400-$1,200 per room drywall repair
- Paint
- = $1.50-$3 per sq ft of wall to prime and paint
- Local rate
- = Your ZIP adjustment, 1.00 for the national average
Free to Embed on Your Website
Add this calculator to your blog, resource page, or client portal — just copy one line of code. Your visitors get a useful tool, you get more engagement.
EstimationPro AI For Contractors, By Contractors Get a Detailed Estimate, Not Just a Rough Number
Upload photos or voice notes and get AI-generated line-item estimates with regional pricing and material lists.
Frequently Asked Questions
How much does wallpaper removal cost per square foot?
This calculator uses $0.75 to $4 per square foot of wall for ordinary paper: strippable $0.75-$1.75, standard $1-$3, and vinyl $1.50-$4. Painted-over or stubborn paper moves to soak and scrape at $3-$8. Published guides vary: Fixr lists $0.75-$2.50 by paper type, UseCalcPro $0.60-$3, Inch Calculator $1-$5 for general removal, and Homewyse $2.99-$6.09 with prep and primer included.
How much does it cost to remove wallpaper from a room?
A 12 x 15 room with 8 ft walls has about 396 sq ft of wall after one door and one window. With standard paper, this calculator puts it at $446-$1,263 before any repair. Inch Calculator lists $400-$1,200 per room, and Thumbtack lists $443-$1,120 as its average range.
Why does painted-over wallpaper cost more to remove?
Fixr says painted-over paper is harder and costlier to remove, and that multiple layers often need both steaming and soaking. UseCalcPro prices painted-over paper or 2 to 3 layers at $5 or more per square foot. CountBricks lists stubborn layers lower, as an additional $0.60-$1.50, so the two guides do not agree. Treat a painted-over wall as soak and scrape until a test patch proves otherwise, and use that rate on stacked layers that fight you too.
Does it cost more to remove wallpaper from drywall or plaster?
Fixr lists plaster at $0.75-$2 per square foot and drywall at $1-$2 or more. Thumbtack notes that plaster handles moisture better than drywall, which may need sanding or a skim coat afterward. Add a repair line on drywall jobs rather than hoping the face paper survives.
How much does a skim coat add after wallpaper removal?
Fixr lists a skim coat after removal at $0.75-$1.50 per square foot. A premium Level 5 skim over drywall runs up to $4, so this calculator uses $0.75-$4. If you only need minor patching, UseCalcPro lists $100-$500 with no unit, and this calculator applies it per room; heavier drywall repair runs $400-$1,200 per room.
Do lead paint rules apply to wallpaper removal?
They can. EPA says paid work that disturbs paint in homes built before 1978 falls under its Renovation, Repair, and Painting rule, and the firm must be certified. Minor repair and maintenance that disturbs six square feet or less of paint per room inside may be exempt, but window replacement, demolition of painted surfaces, and prohibited practices are covered at any size. Paper stripped off a painted wall can disturb that paint, so check before you start.
How should a contractor price wallpaper removal: per square foot, per hour, or per roll?
Per square foot of wall is the easiest to defend, with a separate line for repair. As a check, UseCalcPro shows pro labor at $40-$80 per hour and 4-12 hours per room, which is $160-$960 of labor. Thumbtack reports one pro charging a $20-$25 base fee per roll, or $160-$300 for a medium room of 8-12 rolls.
How long does wallpaper removal take?
Fixr gives one to two days as the typical job. UseCalcPro gives 4-12 hours per room for a pro. Painted-over paper, stacked layers, and repairs push you toward the long end, and any skim coat or primer adds its own drying time on top.
Sources
- Fixr: Wallpaper Removal Cost (January 2025) - per-sq-ft rates by paper and wall type, $50-$75 equipment add-on, skim coat, drywall replacement, job length
- Inch Calculator: Cost to Remove Wallpaper - stripping $0.75-$1.75/sq ft, $400-$1,200 per room
- UseCalcPro: Wallpaper Removal Cost Calculator - soak and scrape $3-$8/sq ft, painted-over or 2-3 layers $5+/sq ft, patching, drywall repair, pro labor hours and rates
- Homewyse: Cost to Remove Wallpaper (May 2026) - $2.99-$6.09/sq ft, with what it includes and excludes
- Thumbtack: How Much Does Wallpaper Removal Cost? - $443-$1,120 average range, plaster versus drywall, per-roll pricing
- CountBricks: Cost to Remove Wallpaper (February 2026) - stubborn layers $0.60-$1.50/sq ft, priming and repainting $1.50-$3/sq ft
- CostHelper: Cost of Wallpaper Removal - taller walls or steep stairwells add 15-25 percent
- EPA: Renovation, Repair, and Painting Program for Contractors - certification and the six square foot exemption
- The $1-$4/sq ft removal range, the $4 skim coat top, and the $200-$600 per-sample lead test come from EstimationPro's pricing reference, compiled from 2025-2026 published cost guides and retail pricing (see the pricing API).
What EstimationPro Does for Contractors
Photos, Voice or Notes In
Describe the job with photos, a voice walkthrough or typed notes and get priced line items for labor and materials. Contractors save 2+ hours per estimate.
Priced for Your Area
Labor and material rates are adjusted for the job's location. You review and edit every line before it goes out.
Automatic Follow-Up
Send the estimate from EstimationPro and your client gets a reminder at 24 hours, 48 hours and 7 days. Many jobs are won on the second or third follow-up.
PDF, Link and Payments
Export a PDF or share a link your client can approve. Collect payments online with Stripe; deposits, milestone schedules and invoices are on Pro.
Related Free Tools
Estimating software for painting contractors
Photos, voice or notes in, a priced estimate out.
Drywall Install Cost
Estimate drywall installation costs including materials and labor. Choose drywall type, finish level, and room size for an accurate installed cost.
Deck Cost
Estimate the total cost to build a deck. Enter dimensions, material type, and features to get a detailed cost breakdown with materials and labor.
Kitchen Remodel
Estimate kitchen remodel costs by scope. Select cabinets, countertops, flooring, appliances, and finishes to get a detailed cost breakdown.
Bathroom Remodel
Estimate bathroom renovation costs. Select fixtures, tile, vanity, and finishes to get a detailed cost breakdown for your bathroom project.
Roof Repair Cost
Estimate roof repair cost by repair type, size, and roof access. Price shingle patches, flashing, vent boots, valleys, and decking with a low-to-high range.
Roof Replacement Cost
Estimate roof replacement cost by roof size, pitch, material, and tear-off layers. Get a per-square material, labor, and total cost breakdown.
TPO Roof Cost
Price a TPO flat roof line by line: membrane thickness, mechanically attached or fully adhered, polyiso layers, cover board, tear-off, edge metal, labor, and pipe boots, curbs and drains.
Fence Installation Cost
Estimate fence installation cost by length, type, height, terrain, and gates. Get a per-linear-foot material, labor, and total cost breakdown.
Turn this job into a full, priced estimate for your client.
Snap photos, talk through the scope, drop in your notes. The AI prices every line item with labor and material rates adjusted for your region, and checks the math.