Last updated: 2026-10-21
Most decks cost $2 to $5 per square foot to stain professionally, and the railing, stairs and prep decide where your job lands in that range. Enter your deck size, finish, prep and ZIP code below to get a local low-to-high price. The starting values are typical defaults for a 12x20 deck, so change them to match your job.
e.g. 20
e.g. 12
0 if no railing
0 if no stairs (open risers have less surface)
e.g. 4
Rotten or split boards, $10-$50/sq ft
Estimated Deck Staining Cost
$688 – $1,668
240 sq ft deck · Semi-transparent stain · $2.87-$6.95 per sq ft of deck, all-in
Cost Breakdown
Labor and finish are priced on the surface actually coated. Sales tax and structural repairs (joists, posts, ledger) are not included.
Tip: Price stripping and sanding as their own lines. On a weathered deck the prep can cost more than the stain, and the homeowner should see that before they compare bids.
Free to use. No signup needed.
What Does a Deck Staining Cost Calculator Need to Get Right?
Square feet times a rate misses the two things that move the number the most: railing and prep. A 240 square foot deck with a clean surface and a short run of rail is mostly brush and roller time. The same deck with peeling solid stain and 60 feet of balusters is a different job, and the price should say so.
This calculator prices each part on the surface that actually gets coated. The deck floor and stairs are priced per square foot at the rate for your finish. Railing is priced per linear foot. Prep (washing, stripping, sanding) is its own per-square-foot line, and replaced boards are priced as a repair before any stain goes on. Every rate is an installed rate, so labor and material are both in it.
I've spent 20+ years in carpentry and remodeling, and I work in the Pacific Northwest now, where moisture and rot are the number one enemy of anything wood. The lesson that carries over to a deck: hidden work will get you. Walk the boards before you price the stain, because a soft board under a fresh coat is still a soft board.
Inputs You'll Need
- Deck length and width in feet (the walking surface only)
- Finish: clear sealer or toner, semi-transparent stain, solid stain, or paint
- Prep: none, wash, wash + strip, wash + sand, or the full strip and sand
- Railing length in linear feet, and whether it is simple or worn and detailed
- Stair steps and stair width (each step counts its tread and riser)
- Decking to replace in square feet, if any boards are rotten or split
- ZIP code for local pricing
Deck Staining Cost Per Square Foot by Finish and Prep
| Item | Unit | Installed Price | Basis |
|---|---|---|---|
| Clear sealer or toner | sq ft | $1.00-$2.50 | Decks.com pro sealing $1.00-$1.25 with light sanding; Fixr sealing $0.75-$4 |
| Semi-transparent stain | sq ft | $1.75-$4.00 | Decks.com $1.75-$4.50 for a kept-up deck |
| Solid stain | sq ft | $2.00-$5.00 | Fixr deck staining $2-$5, light sanding and sealing included |
| Deck paint | sq ft | $5.00-$9.00 | Fixr (labor included); Bob Vila $5-$9 |
| Stairs | sq ft | Same as the deck finish | Fixr stairs $2-$5, same as decking |
| Railing, simple or good shape | linear ft | $4-$12 | Decks.com; Fixr $4-$12 |
| Railing, worn or detailed | linear ft | $6-$16 | Decks.com |
| Clean or power wash | sq ft | $0.25-$0.50 | Fixr (cleaning or power washing alone) |
| Strip old finish | sq ft | $1-$3 alone | Fixr |
| Sanding | sq ft | $1-$4 alone | Fixr |
| Restain after strip, clean, or sand | sq ft | $4-$7 | Fixr; the calculator caps prep at $3.00 so semi-transparent stain plus full prep stays in this range |
| Board replacement | sq ft repaired | $10-$50 | EstimationPro deck repair range |
National ranges from Fixr (updated January 2025), Decks.com, Bob Vila (updated June 2023) and EstimationPro's deck repair range. Prices vary by region; the calculator adjusts them by ZIP code. Get local quotes or check your own costs before you commit to a number.
Worked Examples
1. Typical 12x20 deck, semi-transparent, washed (the calculator defaults)
- Deck: 12 x 20 = 240 sq ft x $1.75-$4.00 = $420-$960
- Stairs: 4 steps x 4 ft x 1.5 sq ft = 24 sq ft x $1.75-$4.00 = $42-$96
- Wash: (240 + 24) = 264 sq ft x $0.25-$0.50 = $66-$132
- Railing: 40 lf x $4-$12 = $160-$480
- Total: $688-$1,668, or $2.87-$6.95 per sq ft of deck all-in
2. Weathered 16x20 deck, full strip and sand, two boards replaced
- Deck: 320 sq ft x $1.75-$4.00 = $560-$1,280
- Stairs: 5 steps x 4 ft x 1.5 = 30 sq ft x $1.75-$4.00 = $52.50-$120
- Wash + strip + sand: 350 sq ft x $2.25-$3.00 = $787.50-$1,050
- Worn railing: 52 lf x $6-$16 = $312-$832
- Board replacement: 11 sq ft x $10-$50 = $110-$550
- Total: $1,822-$3,832, more than double the first example on a deck only a third bigger, because of the prep, worn railing and repairs.
3. Small 10x12 ground-level deck, clear sealer, no railing
- Deck: 120 sq ft x $1.00-$2.50 = $120-$300
- Stairs: 2 steps x 4 ft x 1.5 = 12 sq ft x $1.00-$2.50 = $12-$30
- Wash: 132 sq ft x $0.25-$0.50 = $33-$66
- Total: $165-$396
Pro Tips From the Field
- Walk every board before you price. Push a screwdriver into suspect boards near the house and around posts. If it sinks in, that board is a repair line, not a stain line.
- Price railing on its own. At $4-$16 per linear foot it can be a third of the job, and it is the part homeowners forget is there.
- Write prep as a separate line. On 350 square feet of deck and stairs, a full strip and sand adds $787-$1,050. When the homeowner sees that line, they can compare bids apples to apples.
- Going from solid to semi-transparent means stripping. A semi-transparent stain is made to soak into the wood and won't stick well to a solid coating, while solid can go over either (Hunker). Price the strip and sand, or keep the homeowner on solid.
- Read the label for dry time and weather. Stain on wet wood or right before rain is a callback. Check the product label rather than guessing.
Common Mistakes to Avoid
- Pricing the floor and forgetting the stairs. Every step has a tread and a riser. Four 4-foot steps add about 24 square feet.
- Burying prep inside the stain rate. If your bid shows a prep line and a competitor's doesn't, point it out to the homeowner. Theirs is either including it or skipping it.
- Assuming paint is the budget option. Paint runs $5-$9 per square foot installed, more than any stain on this page.
- Staining over rot. Fresh stain hides a soft board for one season. Replace it first.
- Bidding a national number in a high-cost metro. Enter the job's ZIP so the range reflects the local market, then set your own rates against it.
Related Calculators
- Deck Stain Calculator - How Many Gallons Do You Need?
- Deck Cost Calculator - Price a New Deck
- Deck Railing Calculator - Posts, Balusters and Rail
- Fence Painting Cost Calculator - Stain or Paint a Fence
Pricing a stain job for a client? Try EstimationPro on one real job ($9, 30-day money-back guarantee): build the line-item estimate, send it from EstimationPro, and it follows up with your client automatically: at 24 hours if they haven't opened it, 48 hours after they open it with no reply, and a final reminder at 7 days. When they say yes, you can collect payment online too.
How to Use This Calculator
Enter the deck size
Type the deck length and width in feet. The calculator multiplies them for the walking surface. Stairs and railing are entered separately because they are priced differently.
Pick the finish
Choose clear sealer or toner ($1.00-$2.50/sq ft), semi-transparent stain ($1.75-$4.00), solid stain ($2.00-$5.00), or deck paint ($5.00-$9.00). These are installed rates with labor and material.
Pick the prep the wood needs
A clean deck in good shape needs a wash ($0.25-$0.50/sq ft). A deck with peeling or failed finish needs stripping, sanding, or both. Prep is priced per square foot on top of the finish.
Add railing, stairs, and board repairs
Enter railing in linear feet, stair steps and stair width, and any square feet of decking that has to be replaced before the stain goes on.
Add your ZIP code
Enter a ZIP to adjust the whole range to your metro or state. The result shows a low-to-high total and the all-in price per square foot of deck.
Deck Staining Cost Formula
Surface = (Length x Width) + (Steps x Stair Width x 1.5)
Total = Surface x (Finish Rate + Prep Rate) + Railing LF x Rail Rate + Replaced Sq Ft x $10-$50
Then x your regional multiplier Where:
- Finish Rate
- = Sealer $1.00-$2.50, semi-transparent $1.75-$4.00, solid $2.00-$5.00, paint $5.00-$9.00 per sq ft, installed
- Prep Rate
- = Wash $0.25-$0.50; wash + strip or wash + sand $1.25-$3.00; wash + strip + sand $2.25-$3.00 per sq ft
- Rail Rate
- = $4-$12 per linear ft simple, $6-$16 worn or detailed
- 1.5
- = Sq ft of stained surface per foot of stair width per step (11 in tread + 7 in riser)
Free to Embed on Your Website
Add this calculator to your blog, resource page, or client portal — just copy one line of code. Your visitors get a useful tool, you get more engagement.
EstimationPro AI For Contractors, By Contractors Get a Detailed Estimate, Not Just a Rough Number
Upload photos or voice notes and get AI-generated line-item estimates with regional pricing and material lists.
Frequently Asked Questions
How much does it cost to stain a deck?
Most decks cost $2 to $5 per square foot to stain with a pro (Fixr), or about $1.75 to $4.50 per square foot for a deck that has been kept up (Decks.com). Thumbtack puts the typical project at $873 to $1,897 as of March 2026. With this calculator's typical defaults (a 12x20 deck, semi-transparent stain, a wash, 40 feet of railing and 4 steps), the job lands at $688 to $1,668 before any regional adjustment. Fixr's national average ($550 to $850) is for a 14x18 deck with cleaning, minor repairs, staining and sealing. On this calculator's defaults, the railing alone adds $160 to $480.
How much does it cost to stain deck railings?
Railings are priced by the linear foot: $4 to $12 per linear foot for railing in good shape, and $6 to $16 per linear foot for railing that is worn or has a detailed design (Decks.com). Balusters take far more brush time than flat boards, so 40 feet of railing can cost as much as 100 square feet of deck floor.
Is it cheaper to paint or stain a deck?
Stain is cheaper. Staining runs about $2 to $5 per square foot and painting about $5 to $9 per square foot with labor included (Fixr). Bob Vila's stain vs. paint comparison lists the same $5 to $9 for painting and $2 to $5 for staining. On a typical 240 square foot deck that is roughly $480-$1,200 to stain against $1,200-$2,160 to paint, before railing and prep.
How much does it cost to strip and restain a deck?
Stripping alone runs $1 to $3 per square foot and sanding $1 to $4 per square foot (Fixr). Fixr puts a restain after stripping, cleaning, or sanding at $4 to $7 per square foot. In this calculator, the wash + strip + sand option adds $2.25 to $3.00 per square foot, so semi-transparent stain plus full prep comes to $4.00 to $7.00 per square foot, in line with Fixr's restain range.
How much does it cost to pressure wash a deck before staining?
Cleaning or power washing a deck runs about $0.25 to $0.50 per square foot on its own (Fixr lists power washing alone at $0.30 to $0.40). That is the range the calculator uses for its wash option. On a 240 square foot deck, that is $60 to $120. Check the stain label for how long the wood has to dry after washing.
How do contractors price a deck staining job?
Break the job into lines the homeowner can compare: deck surface by the square foot, stairs by the square foot, railing by the linear foot, prep as its own line, and board replacement as an allowance. Prep swings the most from deck to deck (from nothing to $3.00 per square foot here), so writing it as a separate line keeps you from being compared against a bid that left it out. You can build that as a line-item estimate in EstimationPro, where contractors save 2+ hours per estimate.
How should a contractor price board replacement on a stain job?
Write it as its own allowance line, because split, cracked, or damaged boards need to be replaced right away (Bob Vila), and stain over a bad board is wasted. This calculator prices board replacement at $10 to $50 per square foot repaired. A 12-foot board that is 5.5 inches wide covers about 5.5 square feet, so two boards is about 11 square feet. If the joists or ledger under those boards are soft, that is a structural repair and needs its own price.
How much stain do I need for my deck?
One gallon covers about 150 to 300 square feet per coat depending on the product and how thirsty the wood is (Fixr). For a gallon count by stain type, wood condition and number of coats, use the deck stain calculator. This page prices the whole job, labor included.
Related Articles
Sources
- Decks.com: Average Cost to Stain a Deck (pro staining per sq ft, railing per linear ft, sealing)
- Fixr: How Much Does It Cost to Stain a Deck? (updated January 2025: decking, stairs, railing, cleaning, stripping, sanding, paint, restain, coverage, national average)
- Bob Vila: How Much Does It Cost to Stain a Deck? (updated June 2023: paint vs stain, board replacement before staining)
- Thumbtack: How Much Does It Cost to Stain a Deck? (updated March 2026: typical project range)
- Hunker: Can You Stain Over Existing Exterior Stain? (semi-transparent over solid stain)
What EstimationPro Does for Contractors
Photos, Voice or Notes In
Describe the job with photos, a voice walkthrough or typed notes and get priced line items for labor and materials. Contractors save 2+ hours per estimate.
Priced for Your Area
Labor and material rates are adjusted for the job's location. You review and edit every line before it goes out.
Automatic Follow-Up
Send the estimate from EstimationPro and your client gets a reminder at 24 hours, 48 hours and 7 days. Many jobs are won on the second or third follow-up.
PDF, Link and Payments
Export a PDF or share a link your client can approve. Collect payments online with Stripe; deposits, milestone schedules and invoices are on Pro.
Related Free Tools
Estimating software for painting contractors
Photos, voice or notes in, a priced estimate out.
Drywall Install Cost
Estimate drywall installation costs including materials and labor. Choose drywall type, finish level, and room size for an accurate installed cost.
Deck Cost
Estimate the total cost to build a deck. Enter dimensions, material type, and features to get a detailed cost breakdown with materials and labor.
Kitchen Remodel
Estimate kitchen remodel costs by scope. Select cabinets, countertops, flooring, appliances, and finishes to get a detailed cost breakdown.
Bathroom Remodel
Estimate bathroom renovation costs. Select fixtures, tile, vanity, and finishes to get a detailed cost breakdown for your bathroom project.
Roof Repair Cost
Estimate roof repair cost by repair type, size, and roof access. Price shingle patches, flashing, vent boots, valleys, and decking with a low-to-high range.
Roof Replacement Cost
Estimate roof replacement cost by roof size, pitch, material, and tear-off layers. Get a per-square material, labor, and total cost breakdown.
TPO Roof Cost
Price a TPO flat roof line by line: membrane thickness, mechanically attached or fully adhered, polyiso layers, cover board, tear-off, edge metal, labor, and pipe boots, curbs and drains.
Fence Installation Cost
Estimate fence installation cost by length, type, height, terrain, and gates. Get a per-linear-foot material, labor, and total cost breakdown.
Turn this job into a full, priced estimate for your client.
Snap photos, talk through the scope, drop in your notes. The AI prices every line item with labor and material rates adjusted for your region, and checks the math.